When you buy a new home have you ever thought about how long the geyser may last before you encounter problems? Probably not!
Your homeowner’s insurance may replace a burst geyser. However, be sure to check if you can claim the cost of repairs or if your home is unlivable due to water damage. Some policies allow you to claim for accommodation for the time it takes for your home to be habitable again.
Most geysers will not give you problems for ten years or more in new houses. Check with the seller how old the house is if you are buying a house. Also, check if the geyser has been replaced and when.
Most homeowners realize too late that they never checked if their insurance covers geyser replacement and water damage. Be sure to check your policy and ask your insurance agent. Continue reading “Life expectancy of geysers”
Home buying – the most common defects to look for.
1) Rotted Wood
Continuous exposure to moisture causes wood to rot. Inspect wood in the kitchen and the bathroom: toilet seats, countertops, basin and sink units and flooring. Also check the exterior of the home: deck, eaves and verges.
2) Inadequate Ventilation
Without proper ventilation, moisture cannot evaporate. Over time this will become a problem. Furthermore, bathrooms, kitchens and laundry rooms can become havens for mould growth.
Proper ceiling space ventilation allows the sun’s heat to promote evaporation.
In addition, condensation on the underside of metal roofs, as well as under-tile membranes, can damage the roof structure and ceilings. A home inspection will identify stains and signs of dripping moisture in the ceiling space.
3) Improper Maintenance of Appliances
When home buying, it is important to establish if appliances and other equipment have been regularly maintained, e.g. regular cleaning of ovens, stovetops, filters in the air–conditioning units and extraction hoods.
4) Amateur Repairs
Amateurish (non-professional) repairs are most commonly found in plumbing and the electrical system. These generally do not comply with building regulations represent a real danger, and may cause further serious damage in future.
5) Poor Drainage
Inadequate drainage around the exterior of the home leads to water intrusion in basements, garages and above damp proofing. This can compromise the foundation of a home and create mould problems.
6) Failing Heating & Cooling Systems
A failing or ageing heating and cooling system will likely require costly maintenance. These systems can potentially also emit toxic carbon monoxide fumes. When home buying, it is important to remember that older systems are also considerably less efficient than modern ones. They cost more to run!
7) Environmental Hazards
Because of less stringent building regulations in the past, older homes may contain lead-based paint, high levels of carbon monoxide, toxic mould and asbestos. To identify such problems professional inspection and testing is required.
8) Faulty Geyser Installations
Geysers need to be inspected carefully, as dangerous installations are not visible. A geyser can potentially represent the biggest danger in the home, as it can explode if not correctly installed. A home inspection is imperative to identify problems in this area. More than 40% of the homes I have inspected had faulty geyser installations.
9) Plumbing Problems
Pipes under the sink made of incompatible materials can lead to dripping taps, leaking fixtures and slow drains. The seller should address all plumbing problems before you buy.
10) Electrical Safety Issues
Buying a house with dated and faulty electrical systems can cause breaker tripping or fire. Ungrounded plug outlets and faulty earth leakage circuit breakers are safety hazards and can result in injury, death and financial loss.
I have regularly found faulty wiring in electrical panels and other areas of the homes. In addition, I have found that electrical Certificates of Compliance do not necessarily guarantee an absence of problems.
11) Controlling Water
Water intrusion can be one of the most destructive and expensive problems on a property. Therefore, check for well-maintained gutters, downpipes, and proper grading around the foundation to direct water away from the home.
12) Cracks
Most homes develop some cracks. Old and new homes can develop cracks as well depending on climatic and physical factors.
Not all cracks are structurally significant!
However, it is worth getting to the bottom of what is causing the cracking. A crack is actually the visible symptom of a possible problem and not the problem in itself.
13) Roof Problems
Before buying a house inquire if there have been any roof leaks. Furthermore, insist that the seller guarantees that there are no roof leaks.
Roofing can contain old or damaged materials or improper flashing. Moreover, roofing problems can cause major and expensive problems for your home.
14) Storm Damage
Damage from storms, strong winds, tornadoes or flooding has long-term effects on a home. Therefore, thoroughly inspect the roofing, exterior walls and railings for wind and water damage before buying a house. Also, check for defective (post-storm) repairs. Inspect the internal walls and ceiling for water intrusion. This can potentially lead to mould, with its resulting health problems.
15) Damp and Mould
Surprisingly, most homeowners on the Highveld believe that it is too dry for mould to be a problem. This is a fallacy, especially in older homes.
Mould requires moisture and warmth to grow and is often found in damp, warm areas. Furthermore, it can enter a home through windows, vents, doorways and air-conditioning systems.
Mould can have serious health effects. They produce mycotoxins. Mycotoxins are the chemical toxins found on the surface of the mould spore which can be inhaled, touched or ingested. Moreover, mycotoxins can cause a suppression of the immune system and even cancer.
When home buying, the most common places you may find mould is in the bathroom and kitchen, especially around leaking taps and under sinks. In addition, mould grows behind appliances such as the dishwasher, fridge and clothes dryer. If there are or have been roof leaks you may find mould in the roof space.
Furthermore, foliage growing against the house can cause mould to grow outside and inside the home. Mould can also be found in other areas where condensation and humidity are high.
Approximately 40% of the installations of water heaters or hot water geysers do not comply with the SANS 10254 specification.
The intention of this article is to inform you, in the interests of your and your family’s safety, what you should and should not see if you happen to stick your head into the ceiling space to check out your hot water geyser. If your geyser installation is significantly different from what is described here, get a reputable plumber to repair it. Check out the videos at the bottom of this article!
